Confidence 60

Your goosebumps will get goosebumps.

Ultimate performance. Ultimate quality. Ultimate innovation. Meet the new flagship of Dynaudios most advanced speaker range.

FIND A DEALER
BOOK LISTENING SESSION

Go back to a time when all that mattered was the next track on the album

Contour 30 steps it up a notch from the 20. Of course, it still treads the same path – one of honesty, transparency and sheer entertainment, but it puts it all in a bigger package.Like the rest of the new Contour i family, the 30i has the all-new Esotar 2i tweeter – complete with the Hexis inner dome found throughout our flagship Confidence range and also in the Core series of professional studio reference monitors (trickle-down tech is an amazing thing, isn’t it…). Esotar 2i also gets a new, larger rear chamber. This, together with Hexis, helps to reduce unwanted resonances and smooth out the frequency response for even clearer, sweeter high-frequencies.We’ve endowed Contour 30 with two 18cm MSP drivers, as well as doubling up on the rear ports. Behind the scenes we’ve tweaked the spider suspension (the springy ring that keeps the woofer in the right place when it’s at rest, and controls it in the right way when it’s moving). This one is made from aramid fibres, and retains the ingenious structural properties from before (the ribs are of varying width to give even finer control over the cone’s excursion).Contour 30i continues to use aluminium voice-coils, too. We can make them extremely light – but also bigger than the old-style copper units you’ll find elsewhere. Lighter weight allows larger diameters with more windings, yet low weight, which means we have more control over the cone movement. And that means more control over the sound – especially at high frequencies and high volumes – exactly what you need in a mid/bass driver. Sure, we experimented with small voice-coils on the new Contour – the size other companies might use. The measurements said they should work for Contour. Our ears said otherwise, so we went big. Our ears were right.And, as with Contour 20i, the flatter frequency response from the improved tweeter and mid/bass drivers means we’ve been able to simplify the crossover. Not that it wasn’t elegant before – but now… well, we’ll let you judge.The improved crossover no longer needs impedance correction circuitry to optimise its performance – that’s all now done in the driver itself, simply down to the physical properties of the materials we use. Fewer components, cleaner signal path, better performance.While our engineers and designers were hunkered down listening to everything from jazz, to classical, to metal, to electronica, the team in our on-site factory were scouring sustainable sources for high-quality materials and finishes. They make sure all Contours are furniture-grade: perfectly built, perfectly finished and perfectly packaged.

A new level of high-end listening

The classic passive speaker has evolved. The all-new Confidence takes Dynaudio’s most celebrated audio technologies to startling heights with new materials, techniques and technologies.

Nothing compares to the satisfaction of knowing – for a fact – that something is as good as it gets.

Sit back in your chair and listen, secure in the certainty that every detail of the speakers in front of you is dedicated to revealing every detail of the music they’re playing. Close your eyes and be delighted.

Inside the all-new Confidence

A lower resonant frequency means a shallower frequency overlap between the tweeter and the midrange driver, which you’ll hear as better integration between treble and mids – or, to put it in musical terms – whatever you’re listening to won’t sound as if it’s been divided into distinct ‘double-bass’, ‘trumpet’, ‘triangle’ areas. You get the whole picture; it’s like listening in enhanced colour.

All these design changes mean our engineers were able to experiment with creating a tweeter that doesn’t need heat-dissipating ferrofluid (which has been used in every Esotar tweeter up to now). In the Esotar 3, the combination of the more powerful magnet and the presence of the DDC Lens (see below) means a higher tweeter sensitivity. More sensitivity means the tweeter can react with a lower input voltage. And that means it doesn’t get hot as fast – so it can play louder, just as clearly, for longer.

Confidence 60

Technical specifications

In the box

USB-C cabel, Charger, Manual, Spikes

Accessories 1

Ever considered using a subwoofer in your hi-fi setup but haven’t taken the plunge just yet? We’ve got the lowdown. Let’s get ready to rumble…

Accessories 2

Ever considered using a subwoofer in your hi-fi setup but haven’t taken the plunge just yet? We’ve got the lowdown. Let’s get ready to rumble…

Spikes

Ever considered using a subwoofer in your hi-fi setup but haven’t taken the plunge just yet? We’ve got the lowdown. Let’s get ready to rumble…

  • Sensitivity (dB @ 2.83V/1m) 110 x 190 mm / 4,3 x 7.5"
  • Data 2 187 x 208 mm / 7.4 x 8.2"
quote_white

, Product Manager

Reviews and prizes

Lyd & Bilde Nordic


“When fantasy and reality meet” “It thunders when needed and sounds like a cool breeze when it should.”

Geir Gråbein Nordby Lyd & Bilde 12/2020

Audio Poland


“Even ‘two thirds’ of their strength could be enough for me, and I don‘t think that then the listening quality would be reduced in any way. Beautiful, elegant, clean and at the same time vivid, dense sound. Flawless.”

AUDIO 02/2019, Poland

best of high end


“Sometimes size does matter. The all-new Confidence 60, the flagship of the new Confidence family, towers above the outgoing Confidence C4 model.”

best of high end, Belgium

This is the Confidence series

Having used discount toner cartridges for twenty years, there have been a lot of changes in the toner cartridge market. The market today is approximately a twenty billion.

  • Sensitivity (dB @ 2.83V/1m):
  • Data 2:
  • Data 3:
  • Data 4:
  • Box Principle:
  • Crossover:
  • Data 7:
  • Woofer:
  • Midrange:
  • Data 12:
  • Data 13:
  • Data 14:
  • Confidence 60
  • 87dB (2.83V / 1m)
  • 600W
  • 4 Ω (Minimum 3.7 Ω @ 71Hz)
  • 29Hz–22kHz
  • Bass reflex, down-firing
  • 3 way
  • 200, 2580Hz
  • 2x23cm MSP
  • 2x15 cm MSP
  • 432 x 1679 x 517 mm
  • 17 1/64 x 66 7/64 x 20 23/64 Inches
  • Confidence 50
  • 87dB (2.83V / 1m)
  • 400W
  • 4 Ω (Minimum 2.7 Ω @ 79Hz)
  • 35Hz–22kHz
  • Bass reflex down-firing port
  • 3 way
  • 200, 2860Hz
  • 2x 18 cm MSP
  • 2x 15 cm MSP
  • 364 x 1557 x 424 mm
  • 14 21/64 x 61 19/64 x 16 11/16 Inches
  • Confidence 30
  • 88dB (2.83V / 1m)
  • 350W
  • 4 Ω (Minimum 2.8 Ω @ 85Hz)
  • 38Hz–22kHz
  • Bass reflex down-firing port
  • 3 way
  • 290, 3700Hz
  • 2x18 cm MSP
  • 15 cm MSP
  • 364 x 1382 x 424 mm
  • 14 21/64 x 54 13/32 x 16 11/16 Inches
  • Confidence 20
  • 87dB (2.83V / 1m)
  • 250W
  • 6 Ω (Minimum 5 Ω @ 155Hz)
  • 42Hz–22kHz
  • Bass reflex down-firing port
  • 2 way
  • 2325Hz
  • 18cm MSP
  • -
  • 8 25/32 x 20 15/32 x 16 19/64 Inches
  • 223 x 520 x 444 mm
  • 8 25/32 x 20 15/32 x 17 31/64 Inches

Dynaudio Academy

While it was just a TV show, that little speech at the beginning of the original Star Trek show really did do a good job of capturing our feelings about space.

Read more
2025_Dynaudio_ATE_Ep41_UnderstandingSubwooferLatency_03.32min_ListImage

Understanding Subwoofer Latency

Are you experiencing latent low-end? Out-of-phase phatness? Fear not! On this episode of Ask The Expert, Otto talks you through some very simple tweak...

2025_Dynaudio_ATE_Ep40_SpeakerLoudness_04.31min_ListImage

How to calculate speaker loudness

On this episode of Ask The Expert, Otto explains how to calculate loudness – perfect if you've ever tried to figure out in advance how loud your syste...

EISA_1200x1200px

EISA Awards 2025 - Confidence 20A & Contour 20 Black Edition

We’re thrilled to announce that two of our products have made the cut at the annual EISA awards in the below categories: • Confidence 20A - EISA Best ...